The driftwood weathered wood finish is exceptionally rare and hard to come by. This beautiful work can often be seen in high-end stores. With its dreamy look and authentic wood vibe, driftwood weathered wood look can be topnotch yet highly expensive.
However, here’s a secret: you can create this look on your own if you have the right tools for it.
How amazing is that?
Considering the exceptionally beautiful look, you might think that it can be difficult to achieve that look on your own because it looks so complicated. However, you can easily acquire this look at a fraction of the cost.
A driftwood weathered wood finish is nothing but a simple mixture of different powders that are later painted on an unfinished piece of wood. When mixed with water, it can be directly applied to the untreated wood furniture to achieve a fantastic gray look that looks good and stays for a long time.
A driftwood weathered wood finish can be gorgeous and durable at the same time – a factor that contributes to its high price and prevailing demand.
How would you feel if we were to tell you that you don’t have to spend a fortune to buy this exceptional work?
Hold your horses! We have the perfect solution for you – effortless and cost-effective!
How to Make Driftwood Weathered Wood Finish
You can easily make driftwood weathering wood finish by mixing a pack with 1 cup of water. Amazon has some amazing offers in which you can get two packs for the price of one. Get your hands on this powder and get an exceptional finish on an untreated, unfinished piece of furniture.
One pack of wood finish covers 30-35 square feet of wood, depending on the nature of the solution. If you wish to dilute the solution, you will be able to cover more area.
You will then apply the driftwood solution directly to the piece of wood. Make sure to clean the surface to remove all the excessive traces of other chemicals.
The chances of achieving your desired outcome improve only if you apply this solution on a bare piece of wood. Do not coat it with anything. Directly apply the prepared solution onto the piece of wood using a suitable brush.
- Once you have applied the solution to the wood, you need to wait patiently for the end results. The solution will start to work its magic within 15 to 20 minutes.
- Don’t be wary if the desired results won’t appear initially – be patient. It takes about a day or so to properly leave its mark.
- Don’t worry if you see no results initially. It takes time.
- Sometimes, a weird amalgamation starts to form as soon as the solution hits wood – don’t worry; it will settle down within an hour or two.
- Give it some time to achieve the perfect hue.
- You can test your wood to see the color before starting the process. Make sure the place is secluded.
- To achieve a dark weathered finish, apply the solution directly.
- To achieve a lighter tone, dilute the solution before applying it to the log
- If you want to quicken the process, place the wood log in the sun once you have completely covered it with the solution.
- Don’t poke the log. Let it dry naturally.
Be Mindful of the Top Coat
Once you have achieved the driftwood weathered wood finish, you can use a top coat of your choice to secure the weathered finish. However, remember that oil-based topcoats tend to darken the finish. The beautiful gray of the driftwood will eventually change to a dark brown because of its oil properties.
If you want to keep the gray tones to stay intact, make sure to get a water-based topcoat. Different solvents react to the wood in different ways. Water-based coats help preserve the gray tone without any further changes.
Driftwood weathered wood finish can be used to beautify furniture and other pieces of wood. If you step out to buy one from the market, you may want to spend a fortune because these pieces are exceptionally beautiful; hence highly-prized.
However, if you prepare the coat on your own, you can achieve your desired look without taking a heavy toll on your pocket. This method is effortless, yet it requires patience and precision.
Leave a Reply